Struct dock_runtime::offchain_signatures::Pallet

pub struct Pallet<T>(_);

The pallet implementing the on-chain logic.

Implementations

impl<T> Pallet<T>where T: Config,

pub fn did_params( did: &SignatureParamsOwner ) -> impl Iterator<Item = (IncId, OffchainSignatureParams<T>)>

impl<T> Pallet<T>where T: Config,

pub fn did_public_keys( did: &Did ) -> impl Iterator<Item = (IncId, OffchainPublicKey<T>)>

impl<T> Pallet<T>where T: Config,

pub fn add_params( origin: <T as Config>::Origin, params: AddOffchainSignatureParams<T>, signature: DidOrDidMethodKeySignature<SignatureParamsOwner> ) -> Result<(), DispatchError>

pub fn add_public_key( origin: <T as Config>::Origin, public_key: AddOffchainSignaturePublicKey<T>, signature: DidOrDidMethodKeySignature<Controller> ) -> Result<(), DispatchError>

Add new offchain signature public key. Only the DID controller can add key and it should use the nonce from the DID module. This kind of key cannot be removed by calling remove_keys from the DID module but only by calling remove_public_key of this module.

pub fn remove_params( origin: <T as Config>::Origin, remove: RemoveOffchainSignatureParams<T>, signature: DidOrDidMethodKeySignature<SignatureParamsOwner> ) -> Result<(), DispatchError>

pub fn remove_public_key( origin: <T as Config>::Origin, remove: RemoveOffchainSignaturePublicKey<T>, signature: DidOrDidMethodKeySignature<Controller> ) -> Result<(), DispatchError>

Remove existing offchain signature public key. Only the DID controller can remove key and it should use the nonce from the DID module. This kind of key cannot be removed by calling remove_keys from the DID module.

impl<T> Pallet<T>where T: Config,

pub fn did_params_counter<KArg>(k: KArg) -> IncIdwhere KArg: EncodeLike<SignatureParamsOwner>,

On adding new params, corresponding counter is increased by 1 but the counters don’t decrease on removal.

impl<T> Pallet<T>where T: Config,

pub fn did_public_key_params<KArg1, KArg2>( k1: KArg1, k2: KArg2 ) -> Option<OffchainSignatureParams<T>>where KArg1: EncodeLike<SignatureParamsOwner>, KArg2: EncodeLike<IncId>,

Signature parameters are stored as key value (did, counter) -> signature parameters

impl<T> Pallet<T>where T: Config,

pub fn did_public_key<KArg1, KArg2>( k1: KArg1, k2: KArg2 ) -> Option<OffchainPublicKey<T>>where KArg1: EncodeLike<Did>, KArg2: EncodeLike<IncId>,

Public keys are stored as key value (did, counter) -> public key

impl<T> Pallet<T>where T: Config,

pub fn version() -> StorageVersion

Trait Implementations

impl<T> Callable<T> for Pallet<T>where T: Config,

type Call = Call<T>

impl<T> Clone for Pallet<T>

fn clone(&self) -> Pallet<T>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> Debug for Pallet<T>

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl From<<Pallet<Runtime> as Callable<Runtime>>::Call> for Call

fn from(call: CallableCallFor<OffchainSignatures, Runtime>) -> Self

Converts to this type from the input type.

impl<T> GetStorageVersion for Pallet<T>where T: Config,

fn current_storage_version() -> StorageVersion

Returns the current storage version as supported by the pallet.

fn on_chain_storage_version() -> StorageVersion

Returns the on-chain storage version of the pallet as stored in the storage.

impl<T> HandleDidRemoval for Pallet<T>where T: Config,

fn on_did_removal(did: Did) -> Weight

impl<T> Hooks<<T as Config>::BlockNumber> for Pallet<T>where T: Config,

fn on_finalize(_n: BlockNumber)

The block is being finalized. Implement to have something happen.

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

This will be run when the block is being finalized (before on_finalize). Implement to have something happen using the remaining weight. Will not fire if the remaining weight is 0. Return the weight used, the hook will subtract it from current weight used and pass the result to the next on_idle hook if it exists.

fn on_initialize(_n: BlockNumber) -> Weight

The block is being initialized. Implement to have something happen.

fn on_runtime_upgrade() -> Weight

Perform a module upgrade.

fn offchain_worker(_n: BlockNumber)

Implementing this function on a module allows you to perform long-running tasks that make (by default) validators generate transactions that feed results of those long-running computations back on chain.

fn integrity_test()

Run integrity test.

impl<T> IntegrityTest for Pallet<T>where T: Config,

fn integrity_test()

Run integrity test.

impl IsSubType<<Pallet<Runtime> as Callable<Runtime>>::Call> for Call

fn is_sub_type(&self) -> Option<&CallableCallFor<OffchainSignatures, Runtime>>

Returns Some(_) if self is an instance of sub type T.

impl<T> OffchainWorker<<T as Config>::BlockNumber> for Pallet<T>where T: Config,

fn offchain_worker(n: <T as Config>::BlockNumber)

This function is being called after every block import (when fully synced).

impl<T> OnFinalize<<T as Config>::BlockNumber> for Pallet<T>where T: Config,

fn on_finalize(n: <T as Config>::BlockNumber)

The block is being finalized. Implement to have something happen.

impl<T> OnGenesis for Pallet<T>where T: Config,

fn on_genesis()

Something that should happen at genesis.

impl<T> OnIdle<<T as Config>::BlockNumber> for Pallet<T>where T: Config,

fn on_idle(n: <T as Config>::BlockNumber, remaining_weight: Weight) -> Weight

The block is being finalized. Implement to have something happen in case there is leftover weight. Check the passed remaining_weight to make sure it is high enough to allow for your pallet’s extra computation.

impl<T> OnInitialize<<T as Config>::BlockNumber> for Pallet<T>where T: Config,

fn on_initialize(n: <T as Config>::BlockNumber) -> Weight

The block is being initialized. Implement to have something happen.

impl<T> OnRuntimeUpgrade for Pallet<T>where T: Config,

fn on_runtime_upgrade() -> Weight

Perform a module upgrade.

impl<T> PalletInfoAccess for Pallet<T>where T: Config,

fn index() -> usize

Index of the pallet as configured in the runtime.

fn name() -> &'static str

Name of the pallet as configured in the runtime.

fn module_name() -> &'static str

Name of the Rust module containing the pallet.

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.

impl<T> PalletsInfoAccess for Pallet<T>where T: Config,

fn count() -> usize

The number of pallets’ information that this type represents.

fn infos() -> Vec<PalletInfoData, Global>

All of the pallets’ information that this type represents.

impl<T> PartialEq<Pallet<T>> for Pallet<T>

fn eq(&self, other: &Pallet<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T> StorageInfoTrait for Pallet<T>where T: Config,

fn storage_info() -> Vec<StorageInfo, Global>

impl<T> Eq for Pallet<T>